Do you need a reliable supplier when purchasing a climatic chamber with a wide range of additional equipment? Kambič!

Standard equipment:

• Temperature range 5°C- 95°C or -40°C - 100°C or -40°C - 180°C or -75°C - 180°C
• Forced air circulation with a fan
• Innovative system, which enables the uniform and stable temperature and Rh field  throughout the entire working temperature range.
• Process control through the user-friendly controller with an LCD display and programmable functions (10 programmes, 10 steps, cycling, controlled passes-grades, ….)
• PID temperature and relative humidity controller.
• Temperature regulation with a 'dew-point' system
• Visual and sound alarm in the event of failure
• Temperature setting and display resolution 0.1°C
• Relative humidity setting and display resolution 1 %
• Double protection system against the high temperatures
• when the temperature is 5°C above the set level, the operation of the heating elements is disabled
• mechanical over temperature shut off device
• The interior casing is made of stainless steel AISI 304
• The exterior is made of aluminized sheet, powder coated (RAL 7035)
• Two stainless steel wire shelves
• Programme for the temperature and relative humidity calibration
• Wide selection of optional equipment

Optional additional equipment

• Calibration with a report (10 points, 3 temperatures, 3 humidities)
• Additional wire shelf
• Additional shelf made of perforated sheet
• Access port with plugs (S 40mm, S 50mm, S 90mm)
• The interior is constructed with the AISI 316 material
• Observation glass on the doors with a chamber illumination
• Printer for recording the procedure
• Software equipment for monitoring and recording the measured values on the PC
• IQ&OQ documentation and performance in the field

More about the additional equipment >>

Temperature Chambers with a Cooling System and Forced Air Circulation

Characteristics:

• Temperature range -10°C - 100°C or -40°C - 100°C or -40°C - 180°C or -75°C - 180°C
• Forced air circulation with a fan
• Simple user-friendly microprocessor controller with an LCD display
• Innovative heating technology, which enables a high temperature uniformity and stability
• Programmable microprocessor controller
  (10 programmes, 10 steps, timers, …)
• PID temperature controller
• Fan speed setting
• Start-up setting (time and day)
• Visual and sound alarm in the event of failure or malfunction of the temperature sensor
• Temperature setting resolution  0.1°C
• Temperature display resolution 0.1°C
• Double protection system against high temperatures
• when the temperature is 5°C above the set level, the operation of the heating elements is disabled
• mechanical over temperature shut off device
• System for condensing the humidity without thawing (automatic without any changes in temperature)
• Stainless steel construction of the interior chamber
• Powder coated exterior casing (RAL 7035)
• Glass intermediate doors
• 2 stainless steel shelves
• Interlock with the possibility of locking (the keys are added)
• RS – 232 communication port
• Sub-programme that enables a simple temperature calibration at several points
• Environmentally-friendly cooling medium
• Silent operation

Optional additional equipment

• Calibration with a report (10 points 3 temperatures)
• Calibration with a report (1 point 1 temperature)
• Additional wire shelf
• Additional shelf made of perforated sheet
• Access port with plugs (S 40mm, S 50mm, S 90mm)
• The interior is constructed with the AISI 316 material
• Observation glass on the doors and a light in the chamber
• Printer for recording the procedure (only for the 'C' series)
• Increased temperature range (-40°C - 100°C )

	Please contact us for more information and questions about our products and services.